所屬欄目:百科知識作者:球会体育app下载儀器點擊率:發布時間:2018-10-25 14:24:06
The Polyken™ Probe Tack from ChemInstruments makes it easy to measure the tack of pressure sensitive adhesives. A precision ground 5.0 mm diameter flat probe contacts the adhesive, reverses direction and pulls away from the adhesive. The maximum force required to break the adhesive bond is recorded and displayed.
The Polyken? Probe Tack adhesive testing machine meets the standards set forth in ASTM D2979. Machine speed is 24 ipm (61 cpm), probe diameter of 5 mm and an annular ring weight that applies 9.79 +/-0.10 kPa of force. An automatic test cycle produces a 1 second dwell time from the beginning of contact to the end of contact.
ChemInstruments 的 PT-1000 PolykenTM Probe Tack Tester是專門設計來測量膠帶的Tack的儀器。
符合ASTM D2979 的規範。
5mm直徑精密研磨的平麵探頭壓在黏膠麵,再反方向拉上來。
機器會記錄離開黏膠的最大拉力數值。
速度是 24 ipm (吋/分),61cpm (公分/分)
探頭直徑5mm, 重量9.79± 0.10 Kpa;
設定接觸膠麵後自動停留一秒鍾之後就回頭上拉。
使用5磅(2公斤)的load cell, 可測出很黏到不黏大範圍的數據。
搭配 EZ-LAB 軟件可以畫出分佈圖形。
精確度 load cell 全域的 ± 0.1 %;
額定電壓 120V 或240V;
注意:插電之前需在確認內部並無凝結水氣。
選購項目:建議購買
EZ-Lab 數據收集係統。非常方便,本公司其他儀器也可以用。
EZ-link, 配合的線路。
Cheminstruments的數據收集係統是非常方便的處理力量測試的軟體。此係統不但讀取儀器測到的每一個測試的力量,用數字顯示出來,同時儲存在電腦記憶體裏。
顯示每一組測試的最大值、最小值和平均值。
最多可儲存20組測試數字,操作者可以回查之前測到的數據。
數據可以透過 RS-232 裝置輸出到電腦。
可以選擇 用 克、公斤、磅或 Newton來顯示。
每秒鍾可以紀錄400點數據來計算,是非常精細的測試儀器。
再外接電腦及搭配 EZ-LAB 軟體,還可做到遙控及加強模式之數據收集功能
高 22吋(56公分)
寬 14吋(36 公分)
深 18吋(46 公分)
重 55磅(25 公斤)